autoconf-el-2.69-1.40 RPM for noarch

From OpenSuSE Leap 15.5 for noarch

Emacs mode for editing GNU Autoconf scripts

Provides

• autoconf-el

Requires

• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsXz) <= 5.2-1

License

GPL-3.0+

Changelog

* Wed Mar 15 2017 [email protected]
  - Also BuildRequire m4 for autoconf-el: it was wrongly assumed that
    the two spec files would be in sync (but pre_checkin only syncs
    the Version: and .changes file).
* Thu Feb 09 2017 [email protected]
  - Explicitly buildrequire m4: there is a plan to remove it from the
    implicit buildroot configuration (just like autoconf itself is
    no longer part of a long time already).
* Tue Sep 01 2015 [email protected]
  - Add autoconf-perl-5.17-fixes.patch: autoscan: port to perl 5.17.
* Fri Mar 13 2015 [email protected]
  - Cleanup spec file with spec-cleaner
  - Add gpg signature
  - Correct info file dependencies
* Wed Mar 20 2013 [email protected]
  - Added url as source.
    Please see http://en.opensuse.org/SourceUrls
* Tue Nov 27 2012 [email protected]
  - Repackage with bzip2 so that the package can be built for older
    distributions.
* Fri Apr 27 2012 [email protected]
  - Fix .changes file.
* Thu Apr 26 2012 [email protected]
  - Update to 2.69:
    * Noteworthy changes in release 2.69 (2012-04-24) [stable]
    * * Autoconf now requires perl 5.6 or better (but generated
      configure scripts continue to run without perl).
    * Noteworthy changes in release 2.68b (2012-03-01) [beta] Released
      by Eric Blake, based on git versions 2.68.*.
    * * Autoconf-generated configure scripts now unconditionally
      re-execute themselves with $CONFIG_SHELL, if that's set in the
      environment.
    * * The texinfo documentation no longer specifies "front-cover" or
      "back-cover" texts, so that it may now be included in Debian's
      "main" section.
    * * Support for the Go programming language has been added.  The new
      macro AC_LANG_GO sets variables GOC and GOFLAGS.
    * * AS_LITERAL_IF again treats '=' as a literal.  Regression
      introduced in 2.66.
    * * The macro AS_EXECUTABLE_P, present since 2.50, is now
      documented.
    * * Macros
    - AC_PROG_LN_S and AS_LN_S now fall back on 'cp -pR' (not 'cp -p')
      if 'ln -s' does not work.  This works better for symlinks to
      directories.
    - New macro AC_HEADER_CHECK_STDBOOL.
    - New and updated macros for Fortran support:
      AC_FC_CHECK_BOUNDS to enable array bounds checking
      AC_F77_IMPLICIT_NONE and AC_FC_IMPLICIT_NONE to disable implicit integer
      AC_FC_MODULE_EXTENSION to compute the Fortran 90 module name extension
      AC_FC_MODULE_FLAG for the Fortran 90 module search path flag
      AC_FC_MODULE_OUTPUT_FLAG for the Fortran 90 module output directory flag
      AC_FC_PP_SRCEXT for preprocessed Fortran source files extensions
      AC_FC_PP_DEFINE for the Fortran preprocessor define flag
* Sun Dec 18 2011 [email protected]
  - correct license and style (prepare_spec)
  - minor build fixes, avoid deprecated macros to be more portable
* Sat Sep 17 2011 [email protected]
  - Remove redundant tags/sections from specfile
* Sat Sep 17 2011 [email protected]
  - Remove redundant tags/sections from specfile
  - Use %_smp_mflags for parallel build
* Mon Jan 31 2011 [email protected]
  - Use 2.68 everywhere in specfile.
  - Use %%configure macro in spec file.
* Mon Jan 31 2011 [email protected]
  - Cosmetic changes to spec file
* Fri Dec 10 2010 [email protected]
  - update to 2.68 to include the patch
    * * AC_MSG_ERROR (and AS_ERROR) can once again be followed immediately by
    `dnl'.  Regression introduced in 2.66.
    * * AC_INIT again allows URLs with '?' for its BUG-REPORT argument.
    Regression introduced in 2.66.
    * * AC_REPLACE_FUNCS again allows a non-literal argument, such as a shell
    variable that expands to a list of functions to check.  Regression
    introduced in 2.66.
    * * AT_BANNER() with empty argument will cause visual separation from previous
    test category.
    * * The macros AC_PREPROC_IFELSE, AC_COMPILE_IFELSE, AC_LINK_IFELSE, and
    AC_RUN_IFELSE now warn if the first argument failed to use
    AC_LANG_SOURCE or AC_LANG_PROGRAM to generate the conftest file
    contents.  A new macro AC_LANG_DEFINES_PROVIDED exists if you have
    a compelling reason why you cannot use AC_LANG_SOURCE but must
    avoid the warning.
    * * Newly obsolete macros
    The following macros have been marked obsolete.  New programs
    should use the corresponding Gnulib modules.  Gnulib not only
    detects a larger set of portability problems with these functions,
    but also provides complete workarounds.
      AC_FUNC_ERROR_AT_LINE  AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK
      AC_FUNC_MKTIME  AC_FUNC_STRTOD
* Sun Sep 19 2010 [email protected]
  - added patch autoconf-2.67-fix_dnl.patch to fix regression in
    AC_MSG_ERROR expansion (undefined macro: AS_MESSAGE_LOG_FDdnl)
* Wed Aug 18 2010 [email protected]
  - Update to 2.67:
    * New macro AC_FC_LINE_LENGTH to accept long Fortran source code
      lines.
    * AC_PREPROC_IFELSE now keeps the preprocessed output in the
      conftest.i file for inspection by the commands in the
      ACTION-IF-TRUE argument.
    * autoreconf passes warning flags to new enough versions of
      aclocal.
    * Running an Autotest testsuite in parallel mode no longer triggers
      a race condition that could cause the testsuite run to end early,
      fixing a sporadic failure in autoconf's own testsuite.  Bug
      present since introduction of parallel tests in 2.63b.
    Major changes in Autoconf 2.66 (2010-07-02) [stable]
    * AC_FUNC_MMAP works in C++ mode again.  Regression introduced in
      2.65.
    * Use of m4_divert without a named diversion now issues a syntax
      warning, since it is seldom right to change diversions behind
      autoconf's back.
    * The macros AC_TYPE_INT8_T, AC_TYPE_INT16_T, AC_TYPE_INT32_T, and
      AC_TYPE_INT64_T work again.  Regression introduced in 2.65.
    * AC_PROG_INSTALL correctly uses `shtool' again.  Regression
      introduced in 2.64.
    * Autoconf should work on EBCDIC hosts.
    * AC_CHECK_DECL and AC_CHECK_DECLS accept optional function
      argument types for overloaded C++ functions.
    * AS_SET_CATFILE accepts nonliterals in its variable name argument
      now.
    * Autotest testsuites accept an option --recheck to rerun tests
      that failed or passed unexpectedly during the last non-debug
      testsuite run.
    * AC_ARG_ENABLE and AC_ARG_WITH now also accept `+' signs in
      `--enable-*' and `--with-*' arguments, converting them to
      underscores for the variable names.
    * In configure scripts, loading CONFIG_SITE no longer searches
      PATH, and problems in loading the configuration site files are
      diagnosed.
    * Autotest testsuites may optionally provide colored test results.
    * The previously undocumented Autotest macros AT_ARG_OPTION and
      AT_ARG_OPTION_ARG have seen bug fixes and are documented now.
      AT_ARG_OPTION has been changed in that the negative of a long
      option --OPTION is now --no-OPTION rather than --noOPTION.
    * The macro AS_LITERAL_IF is slightly more conservative; text
      containing shell quotes are no longer treated as literals.
      Furthermore, a new macro, AS_LITERAL_WORD_IF, adds an additional
      level of checking that no whitespace occurs in literals.
    * The macros AS_TR_SH and AS_TR_CPP no longer expand their results.
    * The following macros are now documented:
      AS_BOX
    * New macro AC_FC_FIXEDFORM to accept fixed-form Fortran.
* Mon Jun 28 2010 [email protected]
  - use %_smp_mflags
* Mon May 31 2010 [email protected]
  - add empty install section
* Fri May 28 2010 [email protected]
  - split out test suite that takes 95% of the build time
* Wed Feb 17 2010 [email protected]
  - Update to 2.65
    * * Autoconf is now licensed under the GPLv3+.
    * * The manual is now shipped under the terms of the GNU FDL 1.3.
    * * config.status now provides a --config option to produce the configuration.
    * * Autoconf now requires GNU M4 1.4.6 or later. GNU M4 1.4.13 or
      later is recommended.
    * * Autotest testsuites accept an option --jobs[=N] for parallel testing.
      This feature is still in testing, and may not work on every
      platform, help in improving it would be appreciated.
* Sun Dec 06 2009 [email protected]
  - enable parallel building
* Fri Jul 17 2009 [email protected]
  - Add autoconf-xfail-test27.patch
    + It skips test 27 ([autom4te preselections]) as it's an
      incompatibility between autoconf 2.63 and automake 1.11
      ! This patch needs to be removed with autoconf 2.64 again !

Files

/usr/share/emacs/site-lisp/autoconf-mode.el
/usr/share/emacs/site-lisp/autoconf-mode.elc
/usr/share/emacs/site-lisp/autotest-mode.el
/usr/share/emacs/site-lisp/autotest-mode.elc
/usr/share/emacs/site-lisp/suse-start-autoconf-el.el

Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Jul 9 18:05:00 2024