rshim-2.1.5.0-1.1 RPM for armv7hl

From OpenSuSE Ports Tumbleweed for armv7hl

This is the user-space driver to access the BlueField SoC via the rshim
interface. It provides ways to push boot stream, debug the target or login
via the virtual console or network interface.

Provides

• rshim
• rshim(armv7hl-32)

Requires

• ld-linux-armhf.so.3
• ld-linux-armhf.so.3(GLIBC_2.4)
• libc.so.6
• libc.so.6(GLIBC_2.17)
• libc.so.6(GLIBC_2.28)
• libc.so.6(GLIBC_2.34)
• libc.so.6(GLIBC_2.4)
• libc.so.6(GLIBC_2.7)
• libc.so.6(GLIBC_2.8)
• libc.so.6(GLIBC_2.9)
• libfuse.so.2
• libfuse.so.2(FUSE_2.4)
• libfuse.so.2(FUSE_2.5)
• libfuse.so.2(FUSE_2.8)
• libgcc_s.so.1
• libgcc_s.so.1(GCC_3.5)
• libpci.so.3
• libpci.so.3(LIBPCI_3.0)
• libpci.so.3(LIBPCI_3.13)
• libpci.so.3(LIBPCI_3.5)
• libusb-1.0.so.0
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-2.0 or BSD-3-Clause

Changelog

* Fri Oct 25 2024 Matthias Brugger <[email protected]>
  - Update to 2.1.5.0
    * Avoid polling blocked status during reset
    * Adjust default reset delay to 3 seconds on PCIe
    * Remove workaround support for BF2 A0 chip
    * Only poll/check locked mode for PCIe backend
    * support register read/write via /dev/rshim0/rshim for pcie_lf on BF3
    * add 'CLEAR_ON_READ' command to delete rshim log after read
    * Add ownership transfer feature
    * Allow /dev/rshim<N> devfs creation only with --force option enabled
    * Make sending the initial force command a one-time event
    * Add VFIO support for Bluefield-3 on PCIe
    * Add support for command mode
    * Adjust default boot timeout to 300s
    * Make rshim run in single instance
* Fri May 10 2024 Matthias Brugger <[email protected]>
  - Update to 2.0.29.1 (jsc#PED-6843 jsc#PED-6979)
    * Output SECURE_NIC_MODE in /dev/rshim<N>/misc
    * Allow remote installation via bfb-install
    * Make DROP_MODE more robust
    * Avoid race in bfb push when accessing from BMC and rshim tool in parallel
    * Fix handshake between NIC F and rshim over PCIe
* Thu Mar 07 2024 Matthias Brugger <[email protected]>
  - Update to 2.0.20.0 (jsc#PED-6843 jsc#PED-6979)
    * Adjust delay time for nic_fw reset
    * Add BFB completion condition for enhanced NIC mode
    * Fixes for potential high CPU utilization
* Thu Nov 02 2023 Matthias Brugger <[email protected]>
  - Update to 2.0.12.1
    * Display uptime in seconds for BF3
    * Add fuse3 support
* Wed Aug 30 2023 Matthias Brugger <[email protected]>
  - Update to 2.0.9
    * Fix fallback logic of direct mapping
    * Make timeout configurable through /dev/rshimX/misc
* Fri Apr 21 2023 Matthias Brugger <[email protected]>
  - Update service to new tag format
  - update to 2.0.7
    * adjust reset delay
    * avoid leak the file descriptor for /dev/uio
* Thu Mar 16 2023 Matthias Brugger <[email protected]>
  - update to 2.0.6.19.2
    * fix potential NULL pointer access during USB disconnection
    * fix vfio and direct mapping mode with several devices
    * avoid use of stale cached pci_dev pointer after device reset
    * adjust reset delay
    * update to dual-licensese GPL-2.0/BSD-3-Clause
* Thu Sep 15 2022 Matthias Brugger <[email protected]>
  - update to 2.0.6.13.7
    * make use of rshim with several devices more efficient
    * support 32 bit CR space possible on BF3 USB access
    * support more transfer sizes
    * add new device ID for BF3
    * allow to en/disable VFIO/UIO support via rshim.conf
    * make restart of rshim process more robust fixing potential race
    * set default boot timeout to 150 seconds
* Thu Jul 14 2022 Matthias Brugger <[email protected]>
  - update to 2.0.6.11.5
    * Fix a possible crash on PCIe for BF1/2
    * Fix possible race condition when several rshim devices are present
    * Fix a kernel crash when undbinding from uio
    * Detect new USB/rshim hot plug
* Fri Nov 19 2021 Matthias Brugger <[email protected]>
  - update to 2.0.6.2.2
    * bfb-install: Handle new indications for installation completion
    * Make USB reset configurable and set to 3 seconds
    * Move USB reset to USB up event
* Wed Sep 29 2021 Matthias Brugger <[email protected]>
  - update to 2.0.6.1.5
    * Disable the background timer if no rshim devices
    * Setting default path for rshim config file
    * Refine when some workarounds should be applied
    * Fix hypervisor crash when several cards boot or push streams
    * Set MTU to standard max size
* Thu Mar 11 2021 Matthias Brugger <[email protected]>
  - update to 2.0.5.10
    * fix possible tmfifo data loss in PCIe interface
    * fix USB deadlock
    * reduce CPU load when no rshim device present
    * add PCIe hotplug support
* Mon Jan 25 2021 Matthias Brugger <[email protected]>
  - fix _service file
  - update to 2.0.5.8.3
    * fix various issues
    * add workaround for Bluefield-2 REV-0

Files

/usr/lib/systemd/system/rshim.service
/usr/sbin/rshim
/usr/share/doc/packages/rshim
/usr/share/doc/packages/rshim/README.md
/usr/share/licenses/rshim
/usr/share/licenses/rshim/LICENSE
/usr/share/man/man8/rshim.8.gz

Generated by rpm2html 1.8.1

Fabrice Bellet, Mon Dec 2 23:44:45 2024