clap-zam-plugins-4.3-1.2 RPM for i586

From OpenSuSE Ports Tumbleweed for i586

These plugins provide DSP. Of these, ZamValve has two different
models, one of which uses very large proportion of CPU, but has been
reported to produce more realistic sound than the tanh model.

There currently is no documentation on how to use these plugins, but
anyone who is familiar with outboard gear should be able to work it out.
The default settings and almost every slider is calibrated to
standard ranges.

The suite so far consists of:

ZamAutoSat - Automatic saturation plugin
ZamComp - Mono Compressor plugin
ZamCompX2 - Stereo Compressor plugin
ZamCompExp - Stereo Compressor/Expander plugin
ZamEQ2 - 2x parametric EQ (with high/lowshelf and HP/LP) plugin
ZamValve - Valve distortion (WDF physical model or tanh) plugin
ZamGEQ31 - Mono 31 band graphic equalizer plugin
ZamGEQ31X2 - Stereo 31 band graphic equalizer plugin

Provides

• clap-zam-plugins
• clap-zam-plugins(x86-32)

Requires

• libGL.so.1
• libX11.so.6
• libc.so.6
• libc.so.6(GLIBC_2.0)
• libc.so.6(GLIBC_2.1)
• libc.so.6(GLIBC_2.1.3)
• libc.so.6(GLIBC_2.15)
• libc.so.6(GLIBC_2.17)
• libc.so.6(GLIBC_2.3)
• libc.so.6(GLIBC_2.3.4)
• libc.so.6(GLIBC_2.33)
• libc.so.6(GLIBC_2.34)
• libc.so.6(GLIBC_2.38)
• libc.so.6(GLIBC_2.4)
• libfftw3f.so.3
• libgcc_s.so.1
• libgcc_s.so.1(GCC_3.0)
• libgcc_s.so.1(GLIBC_2.0)
• libm.so.6
• libm.so.6(GLIBC_2.0)
• libm.so.6(GLIBC_2.1)
• libm.so.6(GLIBC_2.27)
• libm.so.6(GLIBC_2.29)
• libsamplerate.so.0
• libsamplerate.so.0(libsamplerate.so.0.0)
• libstdc++.so.6
• libstdc++.so.6(CXXABI_1.3)
• libstdc++.so.6(CXXABI_1.3.15)
• libstdc++.so.6(CXXABI_1.3.8)
• libstdc++.so.6(GLIBCXX_3.4)
• libstdc++.so.6(GLIBCXX_3.4.15)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-2.0-or-later

Changelog

* Sun Sep 08 2024 [email protected]
  - Update to version 4.3:
    * Version 4.3
    * AU: Enable new plugin type
    * dpf: Update submodule to latest main
    * ZamEQ2: Adjust ranges on controls to be similar to SSL 9000 strip
    * ZamNoise: Try again
    * ZamNoise: Try again
    * ZamNoise: Try to fix leak detected by valgrind
    * ZamNoise: Add missing fftw_cleanup()
    * ZamNoise: Fix uninitialised values
    * ZamNoise: Ship new plugin and update UI with new control
    * ZamNoise: Add reduction amount control
    * ZamNoise: Clean up unused code paths
    * ZamNoise: Increase amount of noise reduction without compromising sound
    * ZamNoise: Stronger noise reduction using windowed noise
    * ZamNoise: Use EM algorithm variation with smaller FFT
    * ZaMaximX2: Fix threshold and change ceiling to gain
* Tue Feb 20 2024 Dominique Leuenberger <[email protected]>
  - Use %patch -P N instead of deprecated %patchN.
* Wed Nov 08 2023 Konstantin Voinov <[email protected]>
  - fix conditional patch in .spec
* Sun Nov 05 2023 Konstantin Voinov <[email protected]>
  - Add 01-fix-shell-in-make-for-leap.patch fix build in Leap
  - Update to version 4.2:
    * Version 4.2
    * Update dpf to latest main
    * ZamHeadX2: Fix mapping of FIR filter selection
    * ZamTube: Tweak input gain on gridleaking tube to distinguish modes better
    * ZamTube: Make gridleak mode produce less muddy bass
    * ZamTube: Make insane mode less harsh, adds more bass by fixing gridleak
    * ZamTube: Use two tube stages with tonestack in between
    * ZamTube: Use 20dB max of tube drive and scale output better
    * ZamTube: Move tonestack post tube again, shapes wave better.
    * ZaMultiCompX2: Use detection switch for mono LF when averaging
* Wed Dec 21 2022 [email protected]
  - Update to version 4.1:
    * Version 4.1
    * Makefile compat with non-GNU extensions, install clap and vst3
    * Fix inline processing
    * Handle dynamic buffer size and sample rate changes
    * Version 4.0
    * Update DPF
    * Fix invalid use of dpf states
    * ZamHeadX2: Fix bad initial state
    * ZamVerb: Fix uninitialised values
    * Delete samplerate converter state when done (fix memleak)
* Thu Apr 15 2021 Ferdinand Thiessen <[email protected]>
  - Update to version 3.14
    + ZamTube DSP overhaul
    + Virtual circuit redesigned for realistic tube emulation
    + Two modes - 60's version and Gridleak version
    + Optimised slightly for lower DSP load without losing quality
* Mon Jul 20 2020 Luigi Baldoni <[email protected]>
  - Update to version 3.13
    * ZamTube: Add labels for tonestack styles
    * All: Fix narrowing of double to float math
    * Fix glibc compat for finite math ABI change (-lm)
  - Drop zam-plugins-verbose_build.patch (no longer necessary)
* Fri Jun 05 2020 Luigi Baldoni <[email protected]>
  - Update to version 3.12
    * Bugfixes and DSP improvements
      + ZamCompX2: Fix bug with left channel using right side
      + Compressors: 5% speedup
      + ZaMultiCompX2: 15% Speed up - remove averaging every
      cycle
      + ZaMultiCompX2: Fix averaging
      + ZamTube: Fix uninitialised bugs
  - Spec cleanup
* Sat Sep 21 2019 Giordano Boschetti <[email protected]>
  - separate plugins in specific packages with the conventional Linux names
* Sat Jul 06 2019 Jan Engelhardt <[email protected]>
  - Trim blurry claims, bias and conjecture from description. Stop
    mentioning features that are not even build-enabled.
  - Use find {} + over find {} ;

Files

/usr/lib/clap
/usr/lib/clap/ZaMaximX2.clap
/usr/lib/clap/ZaMultiComp.clap
/usr/lib/clap/ZaMultiCompX2.clap
/usr/lib/clap/ZamAutoSat.clap
/usr/lib/clap/ZamComp.clap
/usr/lib/clap/ZamCompX2.clap
/usr/lib/clap/ZamDelay.clap
/usr/lib/clap/ZamDynamicEQ.clap
/usr/lib/clap/ZamEQ2.clap
/usr/lib/clap/ZamGEQ31.clap
/usr/lib/clap/ZamGate.clap
/usr/lib/clap/ZamGateX2.clap
/usr/lib/clap/ZamGrains.clap
/usr/lib/clap/ZamHeadX2.clap
/usr/lib/clap/ZamNoise.clap
/usr/lib/clap/ZamPhono.clap
/usr/lib/clap/ZamTube.clap
/usr/lib/clap/ZamVerb.clap

Generated by rpm2html 1.8.1

Fabrice Bellet, Sun Dec 1 01:07:54 2024